Technical Specifications

Input channels:
4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe / external trigger
 
Input range:
AC +/- 12 V peak-peak
DC +/- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
 
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)
 
Sampling mode:
Fully simultaneous for 4 channels
FFT resolution:
Min. 100 lines
Max. 3 276 800 lines
 
Measurement modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Recorder - raw signal recording for later post analysis
Stethoscope - listening of the bearing/machine noise
FASIT - expert system for automatic fault detection
Octave analyzer - hearable sound measurement
Bump test - measurement of natural frequencies
ADS - Animated Deflection Shapes (Operating deflection shapes)
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
Processor:
According to the PC
 
Memory, Route:
According to the PC hard drive
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
 
Signal recorder:
3 GB/hour of memory consumption with 64 kHz sampling frequency measured on all 4 Channels
Trigger:
Manual, External, Signal level, Time
Speed change, Time interval
 
Interface:
USB 2.0, 3.0 compatible
Temperature range:
-10˚C to +50˚C
 
Power:
USB powered
Case:
Aluminium - heavy duty
 
Size & Weight:
110 x 115 x 35 mm, 350 g
Minimum PC requirements:
CPU : Intel Atom 1.66GHz
RAM: 1GB RAM
HDD: 160GB
USB full speed 1.1 or 2.0
Languages:
English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai

DATA SHEETS & MANUALS

VIDEOS